These days, clip on flip up sunglasses are the in thing because not only are they very stylish, but they are also very handy to use as compared to a real pair of sunglasses. The great thing about this type of thing is that one does not necessarily need to buy one because it is so easy to make one right at home. So if one would want to try making one, then here are some instructions how.
The first step would be to get hold of an old pair of sunglasses and use a small screwdriver to take the arms of the glasses out. When one does this, then all that will be left would be a pair of lenses of the sunglasses. Take note that the pair of glasses right now is very delicate and may break if not handled well.
The next step is to grab hold of a paper clip that is quite hard so that the clip will be steady. After this, one should now get some pliers and make it very straight. Always do this very slowly because it is quite possible that the wire will break if handled too fast.
After making the wire straight, take a pair of scissors and cut the wire in the middle until it becomes two. From there, one must now place one wire into the hole at the sides of the glasses. After that, he should take the other piece of wire and do the exact same thing.
After the wires have been slotted in, then the next thing that one should do would be to actually tie the wires to the holes. The thing about this is that it is very hard to tie the wires by hand because these things are really tough. So in order to make a tight knot, one should use pliers to be able to tie the wire so that it will not be loose later on.
From there, take the two ends and place them in the center top part of the glasses. Always remember to embed the wires to the frame to make sure that the wire will be invisible to the eyes of the public. Once this is done, tie the two ends together in order to make a small clip in the middle.
Finally, curve the top a little bit so that there is a small clip like part. This part will be the one that will latch itself on to the glasses in order for it to be attached there. When all of the steps have been made, try wearing it on front of a mirror and see how it looks.
So if one is interested in making this thing, try following these steps to making clip on flip up sunglasses. This is guaranteed to be better than buying a new pair because it is cheaper and easier to use. It will also not get broken easily like an actual pair of sunglasses.
The first step would be to get hold of an old pair of sunglasses and use a small screwdriver to take the arms of the glasses out. When one does this, then all that will be left would be a pair of lenses of the sunglasses. Take note that the pair of glasses right now is very delicate and may break if not handled well.
The next step is to grab hold of a paper clip that is quite hard so that the clip will be steady. After this, one should now get some pliers and make it very straight. Always do this very slowly because it is quite possible that the wire will break if handled too fast.
After making the wire straight, take a pair of scissors and cut the wire in the middle until it becomes two. From there, one must now place one wire into the hole at the sides of the glasses. After that, he should take the other piece of wire and do the exact same thing.
After the wires have been slotted in, then the next thing that one should do would be to actually tie the wires to the holes. The thing about this is that it is very hard to tie the wires by hand because these things are really tough. So in order to make a tight knot, one should use pliers to be able to tie the wire so that it will not be loose later on.
From there, take the two ends and place them in the center top part of the glasses. Always remember to embed the wires to the frame to make sure that the wire will be invisible to the eyes of the public. Once this is done, tie the two ends together in order to make a small clip in the middle.
Finally, curve the top a little bit so that there is a small clip like part. This part will be the one that will latch itself on to the glasses in order for it to be attached there. When all of the steps have been made, try wearing it on front of a mirror and see how it looks.
So if one is interested in making this thing, try following these steps to making clip on flip up sunglasses. This is guaranteed to be better than buying a new pair because it is cheaper and easier to use. It will also not get broken easily like an actual pair of sunglasses.
About the Author:
You can visit the website www.brimzsports.com for more helpful information about How To Make Clip On Flip Up Sunglasses